<join>

<join> (jointure) identifie un segment de texte, qui peut être fragmenté, en pointant vers les éléments éventuellement dispersés qui le composent. [16.7 Aggregation]
Modulelinking — 16 Linking, Segmentation, and Alignment
Attributsatt.global (@xml:id, @n, @xml:lang, @rend, @style, @rendition, @xml:base, @xml:space) (att.global.linking (@corresp, @synch, @sameAs, @copyOf, @next, @prev, @exclude, @select)) (att.global.analytic (@ana)) (att.global.facs (@facs)) (att.global.change (@change)) att.pointing (@targetLang, @target, @evaluate) att.typed (@type, @subtype)
targetsspécifie les identifiants des éléments ou des passages qui doivent être réunis dans un élément virtuel.
Statut Optionel
Type de données 2–∞ occurrences of 

<rng:ref name="data.pointer"/>
data.pointer
séparé par un espace
Valeurs deux pointeurs ou plus (URI), séparés par des espaces.
resultspécifie le nom de l'élément que cette agrégation est censée former.
Statut Optionel
Type de données

<rng:ref name="data.name"/>
data.name
Valeurs L'identificateur générique d'un élément dans le modèle XML utilisé.
scopeindique si les cibles à réunir incluent l'intégralité de l'élément indiqué (le sous-arbre entier y compris sa racine) ou seulement les enfants de la cible (les branches du sous-arbre).
Statut Recommendé
Type de données

<rng:ref name="data.enumerated"/>
data.enumerated
Les valeurs autorisées sont:
root
les sous-arbres dotés de leur racine qui sont désignés par l'attribut targets sont joints ; chaque sous-arbre devient un fils de l'élément virtuel créé par la jointure. [Valeur par défaut]
branches
les fils des sous-arbres désignés par l'attribut targets deviennent les fils de l'élément virtuel (c'est-à-dire que les racines des sous-arbres disparaissent).
Utilisé par
Contenu dans
analysis: cl m phr s span w
figures: cell figure table
linking: ab joinGrp seg
nets: graph
spoken: u writing
tagdocs: valDesc
textcrit: app lem rdg wit witDetail
verse: metSym rhyme
Peut contenir
Declaration

<rng:element name="join">
 <rng:ref name="att.global.attributes"/>
 <rng:ref name="att.global.linking.attributes"/>
 <rng:ref name="att.global.analytic.attributes"/>
 <rng:ref name="att.global.facs.attributes"/>
 <rng:ref name="att.global.change.attributes"/>
 <rng:ref name="att.pointing.attributes"/>
 <rng:ref name="att.typed.attributes"/>
 <rng:optional>
  <rng:attribute name="targets">
   <rng:list>
    <rng:ref name="data.pointer"/>
    <rng:ref name="data.pointer"/>
    <rng:zeroOrMore>
     <rng:ref name="data.pointer"/>
    </rng:zeroOrMore>
   </rng:list>
  </rng:attribute>
 </rng:optional>
 <rng:optional>
  <rng:attribute name="result">
   <rng:ref name="data.name"/>
  </rng:attribute>
 </rng:optional>
 <rng:optional>
  <rng:attribute name="scope" a:defaultValue="root">
   <rng:choice>
    <rng:value>root</rng:value>
    <rng:value>branches</rng:value>
   </rng:choice>
  </rng:attribute>
 </rng:optional>
 <rng:zeroOrMore>
  <rng:choice>
   <rng:ref name="model.descLike"/>
   <rng:ref name="model.certLike"/>
  </rng:choice>
 </rng:zeroOrMore>
</rng:element>
element join
{
   att.global.attributes,
   att.global.linking.attributes,
   att.global.analytic.attributes,
   att.global.facs.attributes,
   att.global.change.attributes,
   att.pointing.attributes,
   att.typed.attributes,
   attribute targets { list { data.pointer, data.pointer, data.pointer* } }?,
   attribute result { data.name }?,
   attribute scope { "root" | "branches" }?,
   ( model.descLike | model.certLike )*
}
Schematron

<s:report test="@target and @targets">You may not supply both
@target and @targets</s:report>
Schematron

<s:report test="not(@target) and not(@targets)">You must
supply either @target or @targets</s:report>
Schematron

<s:assert test="contains(@target,' ')">You must supply at least two
values for @target</s:assert>
Exemple

The following example is discussed in section 16.7 Aggregation:

<sp>
 <speaker>Hughie</speaker>
 <p>How does it go? <q>
   <l xml:id="fr_frog_x1">da-da-da</l>
   <l xml:id="fr_frog_l2">gets a new frog</l>
   <l>...</l>
  </q>
 </p>
</sp>
<sp>
 <speaker>Louie</speaker>
 <p>
  <q>
   <l xml:id="fr_frog_l1">When the old pond</l>
   <l>...</l>
  </q>
 </p>
</sp>
<sp>
 <speaker>Dewey</speaker>
 <p>
  <q>... <l xml:id="fr_frog_l3">It's a new pond.</l>
  </q>
 </p>
 <join
   target="#fr_frog_l1 #fr_frog_l2 #fr_frog_l3"
   result="lg"
   scope="root"/>

</sp>

The join element here identifies a linegroup (lg) comprising the three lines indicated by the target attribute. The value root for thescope attribute indicates that the resulting virtual element contains the three l elements linked to at #frog_l1 #frog_l2 #frog_l3, rather than their character data content.

Exemple

In this example, the attribute scope is specified with the value of branches to indicate that the virtual list being constructed is to be made by taking the lists indicated by the target attribute of the join element, discarding the list tags which enclose them, and combining the items contained within the lists into a single virtual list:

<p>Southern dialect (my own variety, at least) has only <list xml:id="fr_LP1">
  <item>
   <s>I done gone</s>
  </item>
  <item>
   <s>I done went</s>
  </item>
 </list> whereas Negro Non-Standard basilect has both these and <list xml:id="fr_LP2">
  <item>
   <s>I done go</s>
  </item>
 </list>.</p>
<p>White Southern dialect also has <list xml:id="fr_LP3">
  <item>
   <s>I've done gone</s>
  </item>
  <item>
   <s>I've done went</s>
  </item>
 </list> which, when they occur in Negro dialect, should probably be considered as
borrowings from other varieties of English.</p>
<join
  result="list"
  xml:id="fr_LST1"
  target="#fr_LP1 #fr_LP2 #fr_LP3"
  scope="branches">

 <desc>Sample sentences in Southern speech</desc>
</join>