<zone>

<zone> 要素surfaceにある表面上の矩形範囲を定義する.
モジュールtranscr — 11 Representation of Primary Sources
属性att.global (@xml:id, @n, @xml:lang, @rend, @rendition, @xml:base, @xml:space) (att.global.linking (@corresp, @synch, @sameAs, @copyOf, @next, @prev, @exclude, @select)) (att.global.analytic (@ana)) (att.global.facs (@facs)) (att.global.change (@change)) att.coordinated (@start, @ulx, @uly, @lrx, @lry) att.typed (@type, @subtype)
pointsidentifies a two dimensional area within the bounding box specified by the other attributes by means of a series of pairs of numbers, each of which gives the x,y coordinates of a point on a line enclosing the area.
状態 任意
データ型 3–∞ occurrences of 

<rng:ref name="data.point"/>
data.point
空白文字で区切られる
rotateindicates the amount by which this zone has been rotated clockwise, with respect to the normal orientation of the parent surface element as implied by the dimensions given in the msDesc element or by the coordinates of the surface itself. The orientation is expressed in arc degrees.
状態 任意
データ型

<rng:ref name="data.count"/>
data.count
初期値 0
当該モジュールを使用するもの
上位
transcr: line surface zone
下位
宣言

<rng:element name="zone">
 <rng:ref name="att.global.attributes"/>
 <rng:ref name="att.global.linking.attributes"/>
 <rng:ref name="att.global.analytic.attributes"/>
 <rng:ref name="att.global.facs.attributes"/>
 <rng:ref name="att.global.change.attributes"/>
 <rng:ref name="att.coordinated.attributes"/>
 <rng:ref name="att.typed.attributes"/>
 <rng:optional>
  <rng:attribute name="points">
   <rng:list>
    <rng:ref name="data.point"/>
    <rng:ref name="data.point"/>
    <rng:ref name="data.point"/>
    <rng:zeroOrMore>
     <rng:ref name="data.point"/>
    </rng:zeroOrMore>
   </rng:list>
  </rng:attribute>
 </rng:optional>
 <rng:optional>
  <rng:attribute name="rotate" a:defaultValue="0">
   <rng:ref name="data.count"/>
  </rng:attribute>
 </rng:optional>
 <rng:zeroOrMore>
  <rng:choice>
   <rng:text/>
   <rng:ref name="model.graphicLike"/>
   <rng:ref name="model.global"/>
   <rng:ref name="surface"/>
   <rng:ref name="model.linePart"/>
  </rng:choice>
 </rng:zeroOrMore>
</rng:element>
element zone
{
   att.global.attributes,
   att.global.linking.attributes,
   att.global.analytic.attributes,
   att.global.facs.attributes,
   att.global.change.attributes,
   att.coordinated.attributes,
   att.typed.attributes,
   attribute points
   {
      list { data.point, data.point, data.point, data.point* }
   }?,
   attribute rotate { data.count }?,
   ( text | model.graphicLike | model.global | surface | model.linePart )*
}
<surface
  ulx="14.54"
  uly="16.14"
  lrx="0"
  lry="0">

 <graphic url="stone.jpg"/>
 <zone
   points="4.6,6.3 5.25,5.85 6.2,6.6 8.19222,7.4125 9.89222,6.5875 10.9422,6.1375 11.4422,6.7125 8.21722,8.3125 6.2,7.65"/>

</surface>

This example defines a non-rectangular zone: see the illustration in section 11.4 Advanced uses of Surface and Zone.

<facsimile>
 <surface
   ulx="50"
   uly="20"
   lrx="400"
   lry="280">

  <zone
    ulx="0"
    uly="0"
    lrx="500"
    lry="321">

   <graphic url="graphic.png "/>
  </zone>
 </surface>
</facsimile>

This example defines a zone which has been defined as larger than its parent surface in order to match the dimensions of the graphic it contains.

解説
要素zoneが表す場所は全て,左表システムを参照して定義される. 当該要素zoneに含まれる要素graphicは,当該要素 zoneが表す面全体を示す.