<zone>

<zone> definisce un'area rettangolare contenuta all'interno di un lemento surface
Modulotranscr — 11 Representation of Primary Sources
Attributiatt.global (@xml:id, @n, @xml:lang, @rend, @style, @rendition, @xml:base, @xml:space) (att.global.linking (@corresp, @synch, @sameAs, @copyOf, @next, @prev, @exclude, @select)) (att.global.analytic (@ana)) (att.global.facs (@facs)) (att.global.change (@change)) att.coordinated (@start, @ulx, @uly, @lrx, @lry) att.typed (@type, @subtype)
pointsidentifies a two dimensional area within the bounding box specified by the other attributes by means of a series of pairs of numbers, each of which gives the x,y coordinates of a point on a line enclosing the area.
Stato Opzionale
Tipo di dati 3–∞ occorrenze di 

<rng:ref name="data.point"/>
data.point
separato da spazio bianco
rotateindicates the amount by which this zone has been rotated clockwise, with respect to the normal orientation of the parent surface element as implied by the dimensions given in the msDesc element or by the coordinates of the surface itself. The orientation is expressed in arc degrees.
Stato Opzionale
Tipo di dati 

<rng:ref name="data.count"/>
data.count
Valore di default 0
Usato da
model.linePart
Contenuto in
transcr: line surface zone
Può contenere
analysis: c cl interp interpGrp m pc phr s span spanGrp w
certainty: certainty precision respons
core: add binaryObject cb choice corr del gap gb graphic hi index lb milestone note orig pb reg sic unclear
figures: figure formula notatedMusic
iso-fs: fLib fs fvLib
linking: alt altGrp anchor join joinGrp link linkGrp seg timeline
spoken: incident kinesic pause shift vocal writing
textcrit: app witDetail
transcr: addSpan damage damageSpan delSpan fw handShift line listTranspose metamark mod redo restore retrace space substJoin supplied surface surplus undo zone
Dichiarazione

<rng:element name="zone">
 <rng:ref name="att.global.attributes"/>
 <rng:ref name="att.global.linking.attributes"/>
 <rng:ref name="att.global.analytic.attributes"/>
 <rng:ref name="att.global.facs.attributes"/>
 <rng:ref name="att.global.change.attributes"/>
 <rng:ref name="att.coordinated.attributes"/>
 <rng:ref name="att.typed.attributes"/>
 <rng:optional>
  <rng:attribute name="points">
   <rng:list>
    <rng:ref name="data.point"/>
    <rng:ref name="data.point"/>
    <rng:ref name="data.point"/>
    <rng:zeroOrMore>
     <rng:ref name="data.point"/>
    </rng:zeroOrMore>
   </rng:list>
  </rng:attribute>
 </rng:optional>
 <rng:optional>
  <rng:attribute name="rotate" a:defaultValue="0">
   <rng:ref name="data.count"/>
  </rng:attribute>
 </rng:optional>
 <rng:zeroOrMore>
  <rng:choice>
   <rng:text/>
   <rng:ref name="model.graphicLike"/>
   <rng:ref name="model.global"/>
   <rng:ref name="surface"/>
   <rng:ref name="model.linePart"/>
  </rng:choice>
 </rng:zeroOrMore>
</rng:element>
element zone
{
   att.global.attributes,
   att.global.linking.attributes,
   att.global.analytic.attributes,
   att.global.facs.attributes,
   att.global.change.attributes,
   att.coordinated.attributes,
   att.typed.attributes,
   attribute points
   {
      list { data.point, data.point, data.point, data.point* }
   }?,
   attribute rotate { data.count }?,
   ( text | model.graphicLike | model.global | surface | model.linePart )*
}
Esempio
<surface
  ulx="14.54"
  uly="16.14"
  lrx="0"
  lry="0">
 <graphic url="stone.jpg"/>
 <zone
   points="4.6,6.3 5.25,5.85 6.2,6.6 8.19222,7.4125 9.89222,6.5875 10.9422,6.1375 11.4422,6.7125 8.21722,8.3125 6.2,7.65"/>
</surface>

This example defines a non-rectangular zone: see the illustration in section 11.4 Advanced uses of Surface and Zone.

Esempio
<facsimile>
 <surface
   ulx="50"
   uly="20"
   lrx="400"
   lry="280">
  <zone
    ulx="0"
    uly="0"
    lrx="500"
    lry="321">
   <graphic url="graphic.png "/>
  </zone>
 </surface>
</facsimile>

This example defines a zone which has been defined as larger than its parent surface in order to match the dimensions of the graphic it contains.